Disc–Planet Interactions: Migration and Resonances in Extrasolar Planetary Systems     

J. C. B. Papaloizou 《Celestial Mechanics and Dynamical Astronomy》2003,87(1-2):53-83

We consider orbital resonances in multiplanet systems. These are expected to arise during or just after formation in a gaseous disc. Disc–planet interaction naturally produces orbital migration and circularization through the action of tidal torques which in turn may lead to an orbital resonance. The mass and angular momentum content of the disc is likely to be comparable to that in the planets so that it is essential to fully incorporate the disc in the analysis.We study the orbital evolution of two planets locked in 2:1 commensurability through migration tidally induced by the disc using both analytic methods and numerical hydrodynamic simulations. The planets are assumed to orbit in an inner cavity containing at most only a small amount of disc material. Results are found to be sensitive to initial surface density profile, planet masses and disc parameters. The evolution may range between attaining and subsequently maintaining a resonance lock with two angles librating to divergent migration with no commensurability formed. In the former case eccentricities increase monotonically with time while the system undergoes inward migration. If the migration is halted by loss of the disc leaving the planets in a final configuration, there is likely to be a low probability of seeing resonant planets at small radii as well as a sensitive dependence on past history.We have also considered a multiplanet system in secular apsidal resonance. We consider the system as being in just one secular normal mode and include the effects of a gaseous disc. It is suggested that a normal mode may be selected by adding in some weak dissipative process in the disc and that it may remain, involving only the planets, when the disc is slowly removed.  相似文献   

智能照明系统在现代建筑照明中的应用研究   总被引：1，自引：0，他引：1  

陈丹 《成都信息工程学院学报》2007,22(6):735-738

在对传统照明系统和智能照明系统进行对比分析的基础上,剖析了智能照明系统的控制策略,并结合实际的工程应用,着重讨论了基于ABB I-Bus产品的智能照明控制系统的实现,结果表明该系统具有高效、便捷、节约能源等优点.同时,还对系统与建筑物楼宇自控系统问的系统集成方式进行了研究.  相似文献   

地理信息系统数据库设计     

潘珩 《成都信息工程学院学报》2006,21(4):555-558

首先分析了地理信息系统的组成、地理信息系统数据的特征、地理信息系统数据库的功能，然后进行了中心式导航系统数据库的设计，给出了数据库模型的E-R图，最后描述了空间地理信息的查询功能。  相似文献   

使用模块方式进入系统空间     

薛筱宇  张钟澍  徐虹 《成都信息工程学院学报》2003,18(2):115-118

LINUX，一个优秀的代码开放的操作系统。对其内核代码的分析，无论对编程或者学习操作系统原理都将事半功倍。然而处于安全性考虑，CPU的设计者将系统空间和用户空间分离，这个措施造成了对内核代码进行调试运行的困难。有许多方法可以使用户程序进入系统空间，比如中断方式、系统调用方式……我们介绍的是采用模块的方式使应用程序进入系统空间。  相似文献   

Preliminary Study on the Translunar Halo Orbits of the Real Earth–Moon System     

Miquel A. Andreu 《Celestial Mechanics and Dynamical Astronomy》2003,86(2):107-130

The computation of translunar Halo orbits of the real Earth–Moon system (REMS) has been an open problem for a long time, but now, it is possible to compute Halo orbits of the REMS in a systematic way. In this paper, we describe the method used for the numerical computation of Halo orbits for a time span longer than 41 years. Halo orbits of the REMS are computed from quasi-periodic Halo orbits of the quasi-bicircular problem (QBCP). The QBCP is a model for the dynamics of a spacecraft in the Earth–Moon–Sun system. It is a Hamiltonian system with three degrees of freedom and depending periodically on time. In this model, Earth, Moon and Sun are moving in a self-consistent motion close to bicircular. The computed Halo orbits of the REMS are compared with the family of Halo orbits of the QBCP. The results show that the QBCP is a good model to understand the main features of the Halo family of the REMS.  相似文献   

银河系运动学参数的确定     

俎中良  赵君亮 《中国科学院上海天文台年刊》2004,(1)

利用 2 0 2个太阳附近疏散星团的视向速度和自行观测资料 ,对太阳的运动和银河系的运动学参数进行了研究。其中 ,距离在 0 .5kpc到 2kpc之间的 12 8个疏散星团对平均太阳运动分量的解算结果是 (u0 ,v0 ,w0 ) =(- 13.8± 1.4 ,- 5 .0± 1.6 ,- 11.6± 2 .9)km/s ;Oort常数和银河系径向运动参数的解算结果分别为 (A ,B) =(16 .9± 1.1,- 11.6± 2 .6 )km·s- 1·kpc- 1及 (C ,D) =(2 .5± 1.1,- 2 .1± 0 .9)km·s- 1·kpc- 1。  相似文献   

Alluvial architecture of the Holocene Rhine–Meuse delta (the Netherlands)     

MARC J.P. GOUW 《Sedimentology》2008,55(5):1487-1516

Ancient fluvial successions often act as hydrocarbon reservoirs. Sub‐surface data on the alluvial architecture of fluvial successions are often incomplete and modelling is performed to reconstruct the stratigraphy. However, all alluvial architecture models suffer from the scarcity of field data to test and calibrate them. The purposes of this study were to quantify the alluvial architecture of the Holocene Rhine–Meuse delta (the Netherlands) and to determine spatio‐temporal trends in the architecture. Five north–south orientated cross‐sections, perpendicular to the general flow direction, were compiled for the fluvial‐dominated part of the delta. These sections were used to calculate the width/thickness ratios of fluvial sandbodies (SBW/SBT) and the proportions of channel‐belt deposits (CDP), clastic overbank deposits (ODP) and organic material (OP) in the succession. Furthermore, the connectedness ratio (CR) between channel belts was calculated for each cross‐section. Distinct spatial and temporal trends in the alluvial architecture were found. SBW/SBT ratios decrease by a factor of ca 4 in a downstream direction. CDP decreases from ca 0·7 (upstream) to ca 0·3 (downstream). OP increases from less than 0·05 in the upstream part of the delta to more than 0·25 in the downstream delta. ODP is approximately constant (0·4). CR is ca 0·25 upstream, which is approximately two times larger than in the downstream part of the delta. Furthermore, CDP in the downstream Rhine–Meuse delta increases after 3000 cal yr BP. These trends are attributed to variations in available accommodation space, floodplain geometry and channel‐belt size. For instance, channel belts tend to narrow in a downstream direction, which reduces SBW/SBT, CDP and CR. Tectonics cause local deviations in the general architectural trends. In addition, the positive correlation between avulsion frequency and the ratio of local to regional aggradation rate probably influenced alluvial architecture in the Rhine–Meuse delta. The Rhine–Meuse data set can be a great resource when developing more sophisticated models for alluvial architecture simulation, which eventually could lead to better characterizations of hydrocarbon reservoirs. To aid such usage of the Rhine–Meuse data set, constraints for relevant parameters are provided at the end of the paper.  相似文献   

Morphological analysis of the drainage system in the Eastern Alps   总被引：2，自引：1，他引：1  

Jrg Robl  Stefan Hergarten  Kurt Stüwe 《Tectonophysics》2008,460(1-4):263-277

We study the morphology of the major rivers draining the Eastern Alps to test whether the active tectonics of this part of the orogen is reflected in the shape of channel profiles of the river network. In our approach we compare channel profiles measured from digital elevation models with numerically modelled channel profiles using a stream power approach. It is shown that regions of high stream power coincide largely with regions of highest topography and largest uplift rates, while the forelands and the Pannonian Basin are characterised by a significantly lower stream power. From stream power modelling we conclude that there is young uplift at the very east of the Eastern Alps, in the Bohemian Massif and in the Pohorje Range. The impact of the Pleistocene glaciations is explored by comparing properties of rivers that drain in proximal and distal positions relative to the ice sheet during the last glacial maximum. Our analysis shows that most knick points, wind gaps and other non-equilibrium features of catchments covered by ice during the last glaciations (Salzach, Enns) can be correlated with glacial processes. In contrast the ice free catchments of the Mur and Drava are characterized by channels in morphological equilibrium at the first approximation and are showing only weak evidence of the strong tectonic activity within these catchments. Finally, the channel profiles of the Adige and the divide between the upper Rhine and Danube catchments differ significantly from the other catchments. We relate this to the fact that the Adige and the Rhine respond to different base levels from the remainder of the Eastern Alps: The Adige may preserve a record from the Messininan base level change and the Rhine is subject to the base level lowering in the Rhine Graben.  相似文献   

Development and application of a GIS-based tool for earthquake-induced hazard prediction     

Chang-Guk Sun  Sung-Ho Chun  Tae-Gyun Ha  Choong-Ki Chung  Dong-Soo Kim   《Computers and Geotechnics》2008,35(3):436-449

An integrated GIS-based tool (GTIS) was constructed to estimate site effects related to the earthquake hazards in the Gyeongju area of Korea. To build the GTIS for the study area, intensive site investigations and geotechnical data collections were performed and a walk-over site survey was additionally carried out to acquire surface geo-knowledge data in accordance with the procedure developed to build the GTIS. For practical applications of the GTIS used to estimate the site effects associated with the amplification of ground motion, seismic microzoning maps of the characteristic site period and the mean shear wave velocity to a depth of 30 m were created and presented as a regional synthetic strategy addressing earthquake-induced hazards. Additionally, based on one-dimensional site response analyses, various seismic microzoning maps for short- and mid-period amplification potentials were created for the study area. Case studies of seismic microzonations in the Gyeongju area verified the usefulness of the GTIS for predicting seismic hazards in the region.  相似文献   

Zircon U–Pb ages, Hf and O isotopes constrain the crustal architecture of the ultrahigh-pressure Dabie orogen in China     

Zi-Fu Zhao  Yong-Fei Zheng  Chun-Sheng Wei  Fu-Kun Chen  Xiaoming Liu  Fu-Yuan Wu 《Chemical Geology》2008,253(3-4):222-242

The crustal structure of the Dabie orogen was reconstructed by a combined study of U–Pb ages, Hf and O isotope compositions of zircons from granitic gneiss from North Dabie, the largest lithotectonic unit in the orogen. The results were deciphered from metamorphic history to protolith origin with respect to continental subduction and exhumation. Zircon U–Pb dating provides consistent ages of 751 ± 7 Ma for protolith crystallization, and two group ages of 213 ± 4 to 245 ± 17 Ma and 126 ± 4 to 131 ± 36 Ma for regional metamorphism. Majority of zircon Hf isotope analyses displays negative ε_Hf(t) values of − 5.1 to − 2.9 with crust Hf model ages of 1.84 to 1.99 Ga, indicating protolith origin from reworking of middle Paleoproterozoic crust. The remaining analyses exhibit positive ε_Hf(t) values of 5.3 to 14.5 with mantle Hf model ages of 0.74 to 1.11 Ga, suggesting prompt reworking of Late Mesoproterozoic to Early Neoproterozoic juvenile crust. Zircon O isotope analyses yield δ¹⁸O values of − 3.26 to 2.79‰, indicating differential involvement of meteoric water in protolith magma by remelting of hydrothermally altered low δ¹⁸O rocks. North Dabie shares the same age of Neoproterozoic low δ¹⁸O protolith with Central Dabie experiencing the Triassic UHP metamorphism, but it was significantly reworked at Early Cretaceous in association with contemporaneous magma emplacement. The Rodinia breakup at about 750 Ma would lead to not only the reworking of juvenile crust in an active rift zone for bimodal protolith of Central Dabie, but also reworking of ancient crust in an arc-continent collision zone for the North Dabie protolith. The spatial difference in the metamorphic age (Triassic vs. Cretaceous) between the northern and southern parts of North Dabie suggests intra-crustal detachment during the continental subduction. Furthermore, the Dabie orogen would have a three-layer structure prior to the Early Cretaceous magmatism: Central Dabie in the upper, North Dabie in the middle, and the source region of Cretaceous magmas in the lower.  相似文献